Hosted by IDTechEx
HomeEventsReportsTVAdvertiseCareersAbout UsIDTechExTwitterFacebookLinkedInYoutubeRSSForward To Friend
IDTechEx Research Subscribers
IDTechEx Show! Berlin 2018 Findings

IDTechEx Show! Berlin 2018 Findings

Here the IDTechEx analysts in attendance present a commentary on the show's highlights in their respective fields of research
3D Printing Progress
May 8, 2018
GM and Autodesk are using generative design for vehicles of the future

GM and Autodesk are using generative design for vehicles of the future

The lighter the car, the less fuel it uses, the less carbon it emits and the more money the driver saves. Now to push the boundaries on its next generation of lightweighting, the automaker is teaming up with Autodesk to use a combination of generative design and additive manufacturing as key technologies to develop future cars and trucks, including its alternative propulsion and zero emission vehicles.
3D Printing Progress
May 2, 2018
Personalized bio-inks boost healing potential of printable body tissue

Personalized bio-inks boost healing potential of printable body tissue

Researchers have incorporated platelet-rich plasma into a bio-ink: a 3-D-printed mixture of cells and gel that could eventually become the stuff of skin grafts and regenerative tissue implants.
3D Printing Progress
Apr 30, 2018
3D printing for heart valve disease

3D printing for heart valve disease

A new study examines the effectiveness of 3D printing technology and computer modeling to predict paravalvular leak in patients undergoing transcatheter aortic valve replacement.
3D Printing Progress
Apr 27, 2018
New solutions for factory floor from Stratasys

New solutions for factory floor from Stratasys

Stratasys has unveiled a range of new solutions designed to accelerate the use of additive manufacturing on the factory floor.
IDTechEx Research Subscribers
3D Printing: Current Overview

3D Printing: Current Overview

This article provides an overview of the current state of play of the 3D printing market.
IDTechEx Research Subscribers
IDTechEx Show Berlin 2018: 3D Printing Highlights

IDTechEx Show Berlin 2018: 3D Printing Highlights

Technology Analyst Dr Bryony Core reports on her 3D printing findings at the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 25, 2018
BMW Group plans additive manufacturing campus

BMW Group plans additive manufacturing campus

The BMW Group is to invest more than €10 million in a new Additive Manufacturing Campus. Located in Oberschleissheim, just north of Munich, the facility will allow the company to continue developing its expertise in this field of work.
Press Release
MakerGear unveils M3 Independent Dual Rev 1 3D printer

MakerGear unveils M3 Independent Dual Rev 1 3D printer

MakerGear has announced new products being unveiled this week.
3D Printing Progress
Apr 23, 2018
Invertebrates inspire first fully 3-D printed active materials

Invertebrates inspire first fully 3-D printed active materials

To overcome the material rigidity and actuation limitations in current robotic systems, a joint U.S. Army Research Laboratory and University of Minnesota research project sought inspiration from invertebrates.
3D Printing Progress
Apr 19, 2018
3D printed house points the way to sustainable construction industry

3D printed house points the way to sustainable construction industry

Printed on-site by a portable robot, the house showcases the role 3D printing can play in reducing construction waste; it increases efficiencies during the building process and allows materials to be reused at the end of the building's life, rather than ending up as landfill.
3D Printing Progress
Apr 18, 2018
First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show

First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show

Quantum Technology Supersensors were the first recipients of the new IDTechEx award for a 'Toxicant Replacement Hero' in Berlin.
3D Printing Progress
Apr 17, 2018
3D Printing Awards Presented at the IDTechEx Show! Berlin

3D Printing Awards Presented at the IDTechEx Show! Berlin

At last week's IDTechEx Show! in Berlin, Additive Industries were presented with the 'Best Development in 3D Printing' Award.
3D Printing Progress
Apr 16, 2018
World's first medium/large-scale 3D thermoset printer

World's first medium/large-scale 3D thermoset printer

Magnum Venus Products, in partnership with the Department of Energy's Oak Ridge National Laboratory, installed the first commercially available medium/large-scale thermoset 3D printer at the Oak Ridge National Laboratory Manufacturing Demonstration Facility in Tennessee.
3D Printing Progress
Apr 13, 2018
Shedding new light on laser additive manufacturing

Shedding new light on laser additive manufacturing

Additive manufacturing allows us to create incredibly complex shapes, which would not be possible using traditional manufacturing techniques. However, objects created using AM have different properties from traditional manufacturing routes, which is sometimes a disadvantage.
3D Printing Progress
Apr 11, 2018
Individual 3D-printed bandages

Individual 3D-printed bandages

A bioengineering professor, along with the help of other engineering faculty and students, created a 3D printer that uses electrospinning technology to print bandages directly onto a patient's skin, making them fit the individual's physical form.
3D Printing Progress
Apr 10, 2018
Smart ink adds new dimensions to 3-D printing

Smart ink adds new dimensions to 3-D printing

Researchers have developed a smart ink that turns 3D-printed structures into objects that can change shape and color. The innovation promises to add even more functionality to 3D printing and could pave the way to a new generation of printed material.
Press Release
Brightlands Materials Center presents inspiring innovations

Brightlands Materials Center presents inspiring innovations

A team of Brightlands Materials Center will participate for the first time in the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 4, 2018
Scientists successfully print glass optics

Scientists successfully print glass optics

For the first time, researchers have successfully 3D-printed optical-quality glasses, on par with commercial glass products currently available on the market.
3D Printing Progress
Apr 3, 2018
Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials

Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials

Holst Centre, AMSYSTEMS Center and Brightlands Materials Centre, three Joint Innovation Centers of TNO will demonstrate their latest developments in printed, moulded and flexible electronics at the IDTechEx Show! 2018 in Berlin.
IDTechEx Research Subscribers
IDTechEx Show! Berlin 2018 Findings

IDTechEx Show! Berlin 2018 Findings

Here the IDTechEx analysts in attendance present a commentary on the show's highlights in their respective fields of research
3D Printing Progress
May 2, 2018
Personalized bio-inks boost healing potential of printable body tissue

Personalized bio-inks boost healing potential of printable body tissue

Researchers have incorporated platelet-rich plasma into a bio-ink: a 3-D-printed mixture of cells and gel that could eventually become the stuff of skin grafts and regenerative tissue implants.
3D Printing Progress
Apr 27, 2018
New solutions for factory floor from Stratasys

New solutions for factory floor from Stratasys

Stratasys has unveiled a range of new solutions designed to accelerate the use of additive manufacturing on the factory floor.
IDTechEx Research Subscribers
IDTechEx Show Berlin 2018: 3D Printing Highlights

IDTechEx Show Berlin 2018: 3D Printing Highlights

Technology Analyst Dr Bryony Core reports on her 3D printing findings at the IDTechEx Show! in Berlin.
Press Release
MakerGear unveils M3 Independent Dual Rev 1 3D printer

MakerGear unveils M3 Independent Dual Rev 1 3D printer

MakerGear has announced new products being unveiled this week.
3D Printing Progress
Apr 19, 2018
3D printed house points the way to sustainable construction industry

3D printed house points the way to sustainable construction industry

Printed on-site by a portable robot, the house showcases the role 3D printing can play in reducing construction waste; it increases efficiencies during the building process and allows materials to be reused at the end of the building's life, rather than ending up as landfill.
3D Printing Progress
Apr 17, 2018
3D Printing Awards Presented at the IDTechEx Show! Berlin

3D Printing Awards Presented at the IDTechEx Show! Berlin

At last week's IDTechEx Show! in Berlin, Additive Industries were presented with the 'Best Development in 3D Printing' Award.
3D Printing Progress
Apr 13, 2018
Shedding new light on laser additive manufacturing

Shedding new light on laser additive manufacturing

Additive manufacturing allows us to create incredibly complex shapes, which would not be possible using traditional manufacturing techniques. However, objects created using AM have different properties from traditional manufacturing routes, which is sometimes a disadvantage.
3D Printing Progress
Apr 10, 2018
Smart ink adds new dimensions to 3-D printing

Smart ink adds new dimensions to 3-D printing

Researchers have developed a smart ink that turns 3D-printed structures into objects that can change shape and color. The innovation promises to add even more functionality to 3D printing and could pave the way to a new generation of printed material.
3D Printing Progress
Apr 4, 2018
Scientists successfully print glass optics

Scientists successfully print glass optics

For the first time, researchers have successfully 3D-printed optical-quality glasses, on par with commercial glass products currently available on the market.
3D Printing Progress
May 8, 2018
GM and Autodesk are using generative design for vehicles of the future

GM and Autodesk are using generative design for vehicles of the future

The lighter the car, the less fuel it uses, the less carbon it emits and the more money the driver saves. Now to push the boundaries on its next generation of lightweighting, the automaker is teaming up with Autodesk to use a combination of generative design and additive manufacturing as key technologies to develop future cars and trucks, including its alternative propulsion and zero emission vehicles.
3D Printing Progress
Apr 30, 2018
3D printing for heart valve disease

3D printing for heart valve disease

A new study examines the effectiveness of 3D printing technology and computer modeling to predict paravalvular leak in patients undergoing transcatheter aortic valve replacement.
IDTechEx Research Subscribers
3D Printing: Current Overview

3D Printing: Current Overview

This article provides an overview of the current state of play of the 3D printing market.
3D Printing Progress
Apr 25, 2018
BMW Group plans additive manufacturing campus

BMW Group plans additive manufacturing campus

The BMW Group is to invest more than €10 million in a new Additive Manufacturing Campus. Located in Oberschleissheim, just north of Munich, the facility will allow the company to continue developing its expertise in this field of work.
3D Printing Progress
Apr 23, 2018
Invertebrates inspire first fully 3-D printed active materials

Invertebrates inspire first fully 3-D printed active materials

To overcome the material rigidity and actuation limitations in current robotic systems, a joint U.S. Army Research Laboratory and University of Minnesota research project sought inspiration from invertebrates.
3D Printing Progress
Apr 18, 2018
First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show

First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show

Quantum Technology Supersensors were the first recipients of the new IDTechEx award for a 'Toxicant Replacement Hero' in Berlin.
3D Printing Progress
Apr 16, 2018
World's first medium/large-scale 3D thermoset printer

World's first medium/large-scale 3D thermoset printer

Magnum Venus Products, in partnership with the Department of Energy's Oak Ridge National Laboratory, installed the first commercially available medium/large-scale thermoset 3D printer at the Oak Ridge National Laboratory Manufacturing Demonstration Facility in Tennessee.
3D Printing Progress
Apr 11, 2018
Individual 3D-printed bandages

Individual 3D-printed bandages

A bioengineering professor, along with the help of other engineering faculty and students, created a 3D printer that uses electrospinning technology to print bandages directly onto a patient's skin, making them fit the individual's physical form.
Press Release
Brightlands Materials Center presents inspiring innovations

Brightlands Materials Center presents inspiring innovations

A team of Brightlands Materials Center will participate for the first time in the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 3, 2018
Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials

Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials

Holst Centre, AMSYSTEMS Center and Brightlands Materials Centre, three Joint Innovation Centers of TNO will demonstrate their latest developments in printed, moulded and flexible electronics at the IDTechEx Show! 2018 in Berlin.