

3D Printing Progress
Apr 27, 2018

New solutions for factory floor from Stratasys
Stratasys has unveiled a range of new solutions designed to accelerate the use of additive manufacturing on the factory floor.
IDTechEx Research Subscribers

3D Printing: Current Overview
This article provides an overview of the current state of play of the 3D printing market.
IDTechEx Research Subscribers
IDTechEx Show Berlin 2018: 3D Printing Highlights
Technology Analyst Dr Bryony Core reports on her 3D printing findings at the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 25, 2018

BMW Group plans additive manufacturing campus
The BMW Group is to invest more than €10 million in a new Additive Manufacturing Campus. Located in Oberschleissheim, just north of Munich, the facility will allow the company to continue developing its expertise in this field of work.
External Company Press Release

MakerGear unveils M3 Independent Dual Rev 1 3D printer
MakerGear has announced new products being unveiled this week.
3D Printing Progress
Apr 23, 2018

Invertebrates inspire first fully 3-D printed active materials
To overcome the material rigidity and actuation limitations in current robotic systems, a joint U.S. Army Research Laboratory and University of Minnesota research project sought inspiration from invertebrates.
3D Printing Progress
Apr 19, 2018

3D printed house points the way to sustainable construction industry
Printed on-site by a portable robot, the house showcases the role 3D printing can play in reducing construction waste; it increases efficiencies during the building process and allows materials to be reused at the end of the building's life, rather than ending up as landfill.
3D Printing Progress
Apr 18, 2018

First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show
Quantum Technology Supersensors were the first recipients of the new IDTechEx award for a 'Toxicant Replacement Hero' in Berlin.
3D Printing Progress
Apr 17, 2018

3D Printing Awards Presented at the IDTechEx Show! Berlin
At last week's IDTechEx Show! in Berlin, Additive Industries were presented with the 'Best Development in 3D Printing' Award.
3D Printing Progress
Apr 16, 2018

World's first medium/large-scale 3D thermoset printer
Magnum Venus Products, in partnership with the Department of Energy's Oak Ridge National Laboratory, installed the first commercially available medium/large-scale thermoset 3D printer at the Oak Ridge National Laboratory Manufacturing Demonstration Facility in Tennessee.
3D Printing Progress
Apr 13, 2018

Shedding new light on laser additive manufacturing
Additive manufacturing allows us to create incredibly complex shapes, which would not be possible using traditional manufacturing techniques. However, objects created using AM have different properties from traditional manufacturing routes, which is sometimes a disadvantage.
3D Printing Progress
Apr 11, 2018

Individual 3D-printed bandages
A bioengineering professor, along with the help of other engineering faculty and students, created a 3D printer that uses electrospinning technology to print bandages directly onto a patient's skin, making them fit the individual's physical form.
3D Printing Progress
Apr 10, 2018

Smart ink adds new dimensions to 3-D printing
Researchers have developed a smart ink that turns 3D-printed structures into objects that can change shape and color. The innovation promises to add even more functionality to 3D printing and could pave the way to a new generation of printed material.
External Company Press Release

Brightlands Materials Center presents inspiring innovations
A team of Brightlands Materials Center will participate for the first time in the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 4, 2018

Scientists successfully print glass optics
For the first time, researchers have successfully 3D-printed optical-quality glasses, on par with commercial glass products currently available on the market.
3D Printing Progress
Apr 3, 2018

Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials
Holst Centre, AMSYSTEMS Center and Brightlands Materials Centre, three Joint Innovation Centers of TNO will demonstrate their latest developments in printed, moulded and flexible electronics at the IDTechEx Show! 2018 in Berlin.
3D Printing Progress
Apr 3, 2018

Soft robotic fish swims alongside real ones
Even with many technological advances in recent years, it remains a challenging task to document marine life up close. But scientists believe they have a possible solution: using robots.
3D Printing Progress
Apr 2, 2018

Scientists print all-liquid 3-D structures
Scientists have developed a way to print 3-D structures composed entirely of liquids. Using a modified 3-D printer, they injected threads of water into silicone oil — sculpting tubes made of one liquid within another liquid.
3D Printing Progress
Apr 27, 2018

New solutions for factory floor from Stratasys
Stratasys has unveiled a range of new solutions designed to accelerate the use of additive manufacturing on the factory floor.
IDTechEx Research Subscribers
IDTechEx Show Berlin 2018: 3D Printing Highlights
Technology Analyst Dr Bryony Core reports on her 3D printing findings at the IDTechEx Show! in Berlin.
External Company Press Release

MakerGear unveils M3 Independent Dual Rev 1 3D printer
MakerGear has announced new products being unveiled this week.
3D Printing Progress
Apr 19, 2018

3D printed house points the way to sustainable construction industry
Printed on-site by a portable robot, the house showcases the role 3D printing can play in reducing construction waste; it increases efficiencies during the building process and allows materials to be reused at the end of the building's life, rather than ending up as landfill.
3D Printing Progress
Apr 17, 2018

3D Printing Awards Presented at the IDTechEx Show! Berlin
At last week's IDTechEx Show! in Berlin, Additive Industries were presented with the 'Best Development in 3D Printing' Award.
3D Printing Progress
Apr 13, 2018

Shedding new light on laser additive manufacturing
Additive manufacturing allows us to create incredibly complex shapes, which would not be possible using traditional manufacturing techniques. However, objects created using AM have different properties from traditional manufacturing routes, which is sometimes a disadvantage.
3D Printing Progress
Apr 10, 2018

Smart ink adds new dimensions to 3-D printing
Researchers have developed a smart ink that turns 3D-printed structures into objects that can change shape and color. The innovation promises to add even more functionality to 3D printing and could pave the way to a new generation of printed material.
3D Printing Progress
Apr 4, 2018

Scientists successfully print glass optics
For the first time, researchers have successfully 3D-printed optical-quality glasses, on par with commercial glass products currently available on the market.
3D Printing Progress
Apr 3, 2018

Soft robotic fish swims alongside real ones
Even with many technological advances in recent years, it remains a challenging task to document marine life up close. But scientists believe they have a possible solution: using robots.
IDTechEx Research Subscribers

3D Printing: Current Overview
This article provides an overview of the current state of play of the 3D printing market.
3D Printing Progress
Apr 25, 2018

BMW Group plans additive manufacturing campus
The BMW Group is to invest more than €10 million in a new Additive Manufacturing Campus. Located in Oberschleissheim, just north of Munich, the facility will allow the company to continue developing its expertise in this field of work.
3D Printing Progress
Apr 23, 2018

Invertebrates inspire first fully 3-D printed active materials
To overcome the material rigidity and actuation limitations in current robotic systems, a joint U.S. Army Research Laboratory and University of Minnesota research project sought inspiration from invertebrates.
3D Printing Progress
Apr 18, 2018

First 'Toxicant Replacement Hero' Award Presented at the IDTechEx Show
Quantum Technology Supersensors were the first recipients of the new IDTechEx award for a 'Toxicant Replacement Hero' in Berlin.
3D Printing Progress
Apr 16, 2018

World's first medium/large-scale 3D thermoset printer
Magnum Venus Products, in partnership with the Department of Energy's Oak Ridge National Laboratory, installed the first commercially available medium/large-scale thermoset 3D printer at the Oak Ridge National Laboratory Manufacturing Demonstration Facility in Tennessee.
3D Printing Progress
Apr 11, 2018

Individual 3D-printed bandages
A bioengineering professor, along with the help of other engineering faculty and students, created a 3D printer that uses electrospinning technology to print bandages directly onto a patient's skin, making them fit the individual's physical form.
External Company Press Release

Brightlands Materials Center presents inspiring innovations
A team of Brightlands Materials Center will participate for the first time in the IDTechEx Show! in Berlin.
3D Printing Progress
Apr 3, 2018

Spotlight on TNO: Holst Centre, AMSYSTEMS, Brightlands Materials
Holst Centre, AMSYSTEMS Center and Brightlands Materials Centre, three Joint Innovation Centers of TNO will demonstrate their latest developments in printed, moulded and flexible electronics at the IDTechEx Show! 2018 in Berlin.
3D Printing Progress
Apr 2, 2018

Scientists print all-liquid 3-D structures
Scientists have developed a way to print 3-D structures composed entirely of liquids. Using a modified 3-D printer, they injected threads of water into silicone oil — sculpting tubes made of one liquid within another liquid.