Hosted by IDTechEx
Novel process to 3D print graphene

Novel process to 3D print graphene

3D Printing Progress
Aug 29, 2018
Progressing 3D printed biological implants

Progressing 3D printed biological implants

The overall goal of TRANSITION, the five-year project funded under Science Foundation Ireland's Spokes programme, is to develop a new class of 3D printed biological implants that will regenerate, rather than replace, diseased joints.
3D Printing Progress
Aug 27, 2018
Water bottles and other recycled 3D printing materials

Water bottles and other recycled 3D printing materials

Soldiers on the battlefield or at remote bases often have to wait weeks for vital replacement parts. Now scientists report they have found a way to fabricate many of these parts within hours under combat conditions using water bottles, cardboard and other recyclable materials.
3D Printing Progress
Aug 24, 2018
End-to-end metal additive manufacturing

End-to-end metal additive manufacturing

Velo3D announced the general release of its end-to-end metal additive manufacturing solution that solves some of the most difficult additive manufacturing challenges including product design limitations, part-to-part consistency, process control and cost-effective manufacturing.
IDTechEx Research Subscribers
3D Bioprinting Technologies

3D Bioprinting Technologies

Due to the numerous problems that remain in 3D bioprinting, researchers have been working on novel methods of biofabrication. This article gives an overview of the what's and how's of 3D bioprinting.
3D Printing Progress
Aug 22, 2018
World's first-ever 4D printing for ceramics

World's first-ever 4D printing for ceramics

A research team has achieved a ground-breaking advancement in materials research by successfully developing the world's first-ever 4D printing for ceramics, which are mechanically robust and can have complex shapes. This could turn a new page in the structural application of ceramics.
3D Printing Progress
Aug 21, 2018
Discovering the latest innovations at 3D Printing USA 2018

Discovering the latest innovations at 3D Printing USA 2018

The IDTechEx Show! presents 3D Printing USA 2018 in Santa Clara on November 14 & 15, which offers the opportunity for key innovators and end users across several verticals to share their insights and expertise in the leading edge of additive manufacturing. IDTechEx forecasts the total market value of 3D printers, materials and services will be $22 billion by 2028.
3D Printing Progress
Aug 20, 2018
$1.1 million funding for magic pen that corrects eye injuries

$1.1 million funding for magic pen that corrects eye injuries

A BioPen that uses special ink to 'colour in' and treat eye wounds has taken a giant leap towards being commercially available, after the NSW Medical Devices Fund awarded its creators $1.1 million.
3D Printing Progress
Aug 17, 2018
TWI leads Open Architecture Additive Manufacturing project

TWI leads Open Architecture Additive Manufacturing project

TWI is taking the lead in the Open Architecture Additive Manufacturing project to demonstrate the ability to manufacture large metallic components via Additive Manufacturing for the benefit of UK Aerospace.
3D Printing Progress
Aug 15, 2018
3D inks that can be erased selectively

3D inks that can be erased selectively

3D printing by direct laser writing enables production of micro-meter-sized structures for many applications, from biomedicine to microelectronics to optical metamaterials. Researchers have now developed 3D inks that can be erased selectively.
3D Printing Progress
Aug 13, 2018
3D-printed device could help treat spinal cord injuries

3D-printed device could help treat spinal cord injuries

Engineers and medical researchers have teamed up to create a groundbreaking 3D-printed device that could someday help patients with long-term spinal cord injuries regain some function.
3D Printing Progress
Aug 10, 2018
Crocodile cartilage, human stem cells for 3D printed joint cartilage

Crocodile cartilage, human stem cells for 3D printed joint cartilage

A microbiologist in central Queensland is using 3D printing, human stem cells, and crocodile cartilage to find a new way to treat arthritis and joint injuries.
3D Printing Progress
Aug 8, 2018
Graphene skinned plane unveiled

Graphene skinned plane unveiled

The University of Central Lancashire has unveiled the world's first graphene skinned plane at an internationally renowned air show.
3D Printing Progress
Aug 7, 2018
Researchers overcome color limitations in 3D powder sintering

Researchers overcome color limitations in 3D powder sintering

In recent years, selective powder sintering for 3D printing has taken off as an increasingly affordable solution for manufacturing made-to-order elements of almost any shape or geometry, impacting multiple sectors of industry.
3D Printing Progress
Aug 7, 2018
Collision-free swimming with ultrasound

Collision-free swimming with ultrasound

The BionicFinWave takes advantage of these properties: the underwater robot swims collision-free through a pipe system made of acrylic glass thanks to ultrasound sensors.
3D Printing Progress
Aug 6, 2018
Are you a start-up or research company? Explore the IDTechEx Launchpad

Are you a start-up or research company? Explore the IDTechEx Launchpad

The IDTechEx Launchpad initiative is open to early-stage start-ups, universities, newly spun-out companies, research labs and government labs who can demonstrate a working prototype or product that highlights new advances in any of the related event topics of: 3d printing, electric vehicles, energy storage, graphene, internet of things, printed electronics, sensors, or wearable technology.
3D Printing Progress
Aug 6, 2018
AI device identifies objects at the speed of light

AI device identifies objects at the speed of light

A team of electrical and computer engineers has created a physical artificial neural network -- a device modeled on how the human brain works -- that can analyze large volumes of data and identify objects at the actual speed of light. The device was created using a 3D printer.
3D Printing Progress
Aug 3, 2018
Bioprinting in space

Bioprinting in space

As we continue to explore deeper into space, astronauts are spending more time in orbit than ever before and need tools that are adaptable and customizable for any given task.
3D Printing Progress
Aug 1, 2018
3D metal printing at micrometer scale.

3D metal printing at micrometer scale.

The FluidFM μ3Dprinter, developed by Cytosurge AG, directly prints microscopic and submicroscopic complex metal structures at room temperature and ambient pressure onto existing objects or surfaces with pinpoint (micrometer) accuracy. This opens new horizons in domains such as microelectronics, MEMS or surface functionalization.
3D Printing Progress
Aug 1, 2018
Fiber lasers: unique tools for automotive & aerospace manufacturing

Fiber lasers: unique tools for automotive & aerospace manufacturing

Automotive and aerospace manufacturers are increasingly turning to fiber lasers to resolve their manufacturing challenges.
3D Printing Progress
Aug 29, 2018
Progressing 3D printed biological implants

Progressing 3D printed biological implants

The overall goal of TRANSITION, the five-year project funded under Science Foundation Ireland's Spokes programme, is to develop a new class of 3D printed biological implants that will regenerate, rather than replace, diseased joints.
3D Printing Progress
Aug 24, 2018
End-to-end metal additive manufacturing

End-to-end metal additive manufacturing

Velo3D announced the general release of its end-to-end metal additive manufacturing solution that solves some of the most difficult additive manufacturing challenges including product design limitations, part-to-part consistency, process control and cost-effective manufacturing.
3D Printing Progress
Aug 22, 2018
World's first-ever 4D printing for ceramics

World's first-ever 4D printing for ceramics

A research team has achieved a ground-breaking advancement in materials research by successfully developing the world's first-ever 4D printing for ceramics, which are mechanically robust and can have complex shapes. This could turn a new page in the structural application of ceramics.
3D Printing Progress
Aug 20, 2018
$1.1 million funding for magic pen that corrects eye injuries

$1.1 million funding for magic pen that corrects eye injuries

A BioPen that uses special ink to 'colour in' and treat eye wounds has taken a giant leap towards being commercially available, after the NSW Medical Devices Fund awarded its creators $1.1 million.
3D Printing Progress
Aug 15, 2018
3D inks that can be erased selectively

3D inks that can be erased selectively

3D printing by direct laser writing enables production of micro-meter-sized structures for many applications, from biomedicine to microelectronics to optical metamaterials. Researchers have now developed 3D inks that can be erased selectively.
3D Printing Progress
Aug 10, 2018
Crocodile cartilage, human stem cells for 3D printed joint cartilage

Crocodile cartilage, human stem cells for 3D printed joint cartilage

A microbiologist in central Queensland is using 3D printing, human stem cells, and crocodile cartilage to find a new way to treat arthritis and joint injuries.
3D Printing Progress
Aug 7, 2018
Researchers overcome color limitations in 3D powder sintering

Researchers overcome color limitations in 3D powder sintering

In recent years, selective powder sintering for 3D printing has taken off as an increasingly affordable solution for manufacturing made-to-order elements of almost any shape or geometry, impacting multiple sectors of industry.
3D Printing Progress
Aug 6, 2018
Are you a start-up or research company? Explore the IDTechEx Launchpad

Are you a start-up or research company? Explore the IDTechEx Launchpad

The IDTechEx Launchpad initiative is open to early-stage start-ups, universities, newly spun-out companies, research labs and government labs who can demonstrate a working prototype or product that highlights new advances in any of the related event topics of: 3d printing, electric vehicles, energy storage, graphene, internet of things, printed electronics, sensors, or wearable technology.
3D Printing Progress
Aug 3, 2018
Bioprinting in space

Bioprinting in space

As we continue to explore deeper into space, astronauts are spending more time in orbit than ever before and need tools that are adaptable and customizable for any given task.
3D Printing Progress
Aug 1, 2018
Fiber lasers: unique tools for automotive & aerospace manufacturing

Fiber lasers: unique tools for automotive & aerospace manufacturing

Automotive and aerospace manufacturers are increasingly turning to fiber lasers to resolve their manufacturing challenges.
3D Printing Progress
Aug 27, 2018
Water bottles and other recycled 3D printing materials

Water bottles and other recycled 3D printing materials

Soldiers on the battlefield or at remote bases often have to wait weeks for vital replacement parts. Now scientists report they have found a way to fabricate many of these parts within hours under combat conditions using water bottles, cardboard and other recyclable materials.
IDTechEx Research Subscribers
3D Bioprinting Technologies

3D Bioprinting Technologies

Due to the numerous problems that remain in 3D bioprinting, researchers have been working on novel methods of biofabrication. This article gives an overview of the what's and how's of 3D bioprinting.
3D Printing Progress
Aug 21, 2018
Discovering the latest innovations at 3D Printing USA 2018

Discovering the latest innovations at 3D Printing USA 2018

The IDTechEx Show! presents 3D Printing USA 2018 in Santa Clara on November 14 & 15, which offers the opportunity for key innovators and end users across several verticals to share their insights and expertise in the leading edge of additive manufacturing. IDTechEx forecasts the total market value of 3D printers, materials and services will be $22 billion by 2028.
3D Printing Progress
Aug 17, 2018
TWI leads Open Architecture Additive Manufacturing project

TWI leads Open Architecture Additive Manufacturing project

TWI is taking the lead in the Open Architecture Additive Manufacturing project to demonstrate the ability to manufacture large metallic components via Additive Manufacturing for the benefit of UK Aerospace.
3D Printing Progress
Aug 13, 2018
3D-printed device could help treat spinal cord injuries

3D-printed device could help treat spinal cord injuries

Engineers and medical researchers have teamed up to create a groundbreaking 3D-printed device that could someday help patients with long-term spinal cord injuries regain some function.
3D Printing Progress
Aug 8, 2018
Graphene skinned plane unveiled

Graphene skinned plane unveiled

The University of Central Lancashire has unveiled the world's first graphene skinned plane at an internationally renowned air show.
3D Printing Progress
Aug 7, 2018
Collision-free swimming with ultrasound

Collision-free swimming with ultrasound

The BionicFinWave takes advantage of these properties: the underwater robot swims collision-free through a pipe system made of acrylic glass thanks to ultrasound sensors.
3D Printing Progress
Aug 6, 2018
AI device identifies objects at the speed of light

AI device identifies objects at the speed of light

A team of electrical and computer engineers has created a physical artificial neural network -- a device modeled on how the human brain works -- that can analyze large volumes of data and identify objects at the actual speed of light. The device was created using a 3D printer.
3D Printing Progress
Aug 1, 2018
3D metal printing at micrometer scale.

3D metal printing at micrometer scale.

The FluidFM μ3Dprinter, developed by Cytosurge AG, directly prints microscopic and submicroscopic complex metal structures at room temperature and ambient pressure onto existing objects or surfaces with pinpoint (micrometer) accuracy. This opens new horizons in domains such as microelectronics, MEMS or surface functionalization.
More IDTechEx Journals