Hosted by IDTechEx
3D Printed Make Up Technology Wins Innovation Award

3D Printed Make Up Technology Wins Innovation Award

IDTechEx Research Subscribers
Circuit Prototyping with Additive Electronics Manufacturing

Circuit Prototyping with Additive Electronics Manufacturing

In this IDTechEx Premium Article, we consider circuit prototyping with additive manufacturing and how it relates to 3D printed electronics.
3D Printing Progress
Nov 27, 2020
3D Printed Coral, Bioreactors Boost Microalgae Production for Biofuels

3D Printed Coral, Bioreactors Boost Microalgae Production for Biofuels

Using light as an energy source, photosynthetic microalgae can be used to produce products like biofuels and cosmetics. But algae grown in a reactor block out the light on which they feed. New reactor designs could solve this problem and help the industry move forward.
3D Printing Progress
Nov 26, 2020
IDTechEx: The Graphene Market Will Reach $700m by 2031

IDTechEx: The Graphene Market Will Reach $700m by 2031

Graphene materials are progressing through their own hype curve. The commercialization has been making steady progress and IDTechEx expect the graphene market to significantly grow over the next decade.
3D Printing Progress
Nov 25, 2020
Contact Lenses For Diagnostic and Therapeutic Use

Contact Lenses For Diagnostic and Therapeutic Use

Human bodily fluids and secretions contain molecules known as biomarkers that contain a wealth of information about the body's health and the presence of disease. Among secretions such as tears, sweat and saliva, tears are considered the best source of biomarkers, with concentrations similar to those found in blood.
3D Printing Progress
Nov 24, 2020
Despite COVID the 3D Printing Market Will Be Worth $45bn in 2030

Despite COVID the 3D Printing Market Will Be Worth $45bn in 2030

IDTechEx predicts that despite COVID the 3D printing market will be worth $45bn in 2030. But how will COVID impact the 3D printing industry? What are the key drivers and restraints of market growth?
External Company Press Release
Relativity Space Raises $500M Towards 3D Printed Rockets

Relativity Space Raises $500M Towards 3D Printed Rockets

Relativity Space, the first company to 3D print an entire rocket and build the largest metal 3D printers in the world, has closed a $500 million Series D equity funding round. The funding will enable Relativity to accelerate its planned initiatives, including its factory of the future, launch vehicle development, and 3D printing technologies.
3D Printing Progress
Nov 24, 2020
First 3D Printed Apartment Building in Germany

First 3D Printed Apartment Building in Germany

PERI GmbH announced at the end of September 2020 that work had begun on Germany's first printed residential house in Beckum, North Rhine-Westphalia. Only two months later, work has begun on the next residential building to make use of 3D construction printing technology.
3D Printing Progress
Nov 23, 2020
Manufacturing Breakthrough Towards Eliminating Waste in 3D Printing

Manufacturing Breakthrough Towards Eliminating Waste in 3D Printing

Materialise  announces  Bluesint PA12, a material innovation that makes it possible to 3D print with up to 100% re-used powder.
External Company Press Release
Water-Soluble Support Material Enables 3D Printing Capabilities

Water-Soluble Support Material Enables 3D Printing Capabilities

Built for exceptional temperature stability, this new product thrives in printing conditions that no existing water-soluble support material can withstand. This makes it uniquely compatible with industry-favored thermoplastics such as Polyetheretherketone and Polyetherimide and significantly reduces the cost and time of downstream processing.
3D Printing Progress
Nov 19, 2020
3D Electronics Market Is Forecast to Reach Around $3bn by 2030

3D Electronics Market Is Forecast to Reach Around $3bn by 2030

The 3D electronics market is diversifying and is forecast to reach around $3bn by 2030. Find out more in the IDTechEx report, "3D Electronics 2020-2030: Technologies, Forecasts, Players".
3D Printing Progress
Nov 19, 2020
3D Bioprinted Heart Provides New Tool for Surgeons

3D Bioprinted Heart Provides New Tool for Surgeons

Surgeons will soon have a powerful new tool for planning and practice with the creation of the first full-sized 3D bioprinted model of the human heart.
External Company Press Release
Waste Concrete Repurposed into Public Furniture with 3D Printing

Waste Concrete Repurposed into Public Furniture with 3D Printing

Waste concrete from demolished buildings is to be reinvented and made into new custom-made outdoor memorials and public garden furniture thanks to a new, innovative £6m project using 3D printing.
3D Printing Progress
Nov 17, 2020
Desirable Metals for 3D Printing Near Market Readiness

Desirable Metals for 3D Printing Near Market Readiness

Despite a temporary setback owing to the COVID-19 pandemic, the market for 3D printing of metals is expected to see a significant rise over the next decade. Within that, it is anticipated that most of the revenue will be attributed to material sales.
3D Printing Progress
Nov 16, 2020
3D Printing Biomedical Parts with Supersonic Speed

3D Printing Biomedical Parts with Supersonic Speed

Forget glue, screws, heat or other traditional bonding methods. A collaboration has developed a 3D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed.
IDTechEx Research Subscribers
Fluoropolymer: 3D Printing, RF Sputtering, Recycling Commercialisation

Fluoropolymer: 3D Printing, RF Sputtering, Recycling Commercialisation

Processing by the fluorochemical industry is broadly as shown right. Specific fluoropolymer formulations and formats are then produced by cross linking, copolymerisation etc. then extrusion calendaring and so on.
External Company Press Release
Elementum 3D Gold Medal, US Air Force Advanced Manufacturing Olympics

Elementum 3D Gold Medal, US Air Force Advanced Manufacturing Olympics

Elementum 3D earned first place at the inaugural US. Air Force Advanced Manufacturing Olympics. The company won the event's "Material Hurdles" technical challenge with its A7050-RAM2 high-strength aluminum alloy, beating eight other finalists.
External Company Press Release
Introducing Ultimaker 2+ Connect: Robust Single Extrusion

Introducing Ultimaker 2+ Connect: Robust Single Extrusion

The new Ultimaker 2+ Connect improves on its predecessor's legacy and allows users to send print jobs via Wi-Fi or Ethernet.
External Company Press Release
Carbon and Fast Radius Expand Strategic Partnership

Carbon and Fast Radius Expand Strategic Partnership

Carbon and Fast Radius announced an expansion of its strategic partnership that broadens Fast Radius' fleet of 3D printers with the addition of the Carbon L1 printer. The adoption of the L1 printer complements Fast Radius' in-production Carbon M series printers and expands capabilities into large part production using Carbon DLS.
3D Printing Progress
Nov 10, 2020
Essentium Introduces Industry-First Anti-Static Material to Advance AM

Essentium Introduces Industry-First Anti-Static Material to Advance AM

Essentium introduces industry-first anti-static material to advance additive manufacturing applications in the aerospace and defense industries. TPU 58D-AS is an electrostatic discharge safe and anti-static thermoplastic polyurethane filament that is available for the first time in color.
IDTechEx Research Subscribers
Circuit Prototyping with Additive Electronics Manufacturing

Circuit Prototyping with Additive Electronics Manufacturing

In this IDTechEx Premium Article, we consider circuit prototyping with additive manufacturing and how it relates to 3D printed electronics.
3D Printing Progress
Nov 26, 2020
IDTechEx: The Graphene Market Will Reach $700m by 2031

IDTechEx: The Graphene Market Will Reach $700m by 2031

Graphene materials are progressing through their own hype curve. The commercialization has been making steady progress and IDTechEx expect the graphene market to significantly grow over the next decade.
3D Printing Progress
Nov 24, 2020
Despite COVID the 3D Printing Market Will Be Worth $45bn in 2030

Despite COVID the 3D Printing Market Will Be Worth $45bn in 2030

IDTechEx predicts that despite COVID the 3D printing market will be worth $45bn in 2030. But how will COVID impact the 3D printing industry? What are the key drivers and restraints of market growth?
3D Printing Progress
Nov 24, 2020
First 3D Printed Apartment Building in Germany

First 3D Printed Apartment Building in Germany

PERI GmbH announced at the end of September 2020 that work had begun on Germany's first printed residential house in Beckum, North Rhine-Westphalia. Only two months later, work has begun on the next residential building to make use of 3D construction printing technology.
External Company Press Release
Water-Soluble Support Material Enables 3D Printing Capabilities

Water-Soluble Support Material Enables 3D Printing Capabilities

Built for exceptional temperature stability, this new product thrives in printing conditions that no existing water-soluble support material can withstand. This makes it uniquely compatible with industry-favored thermoplastics such as Polyetheretherketone and Polyetherimide and significantly reduces the cost and time of downstream processing.
3D Printing Progress
Nov 19, 2020
3D Bioprinted Heart Provides New Tool for Surgeons

3D Bioprinted Heart Provides New Tool for Surgeons

Surgeons will soon have a powerful new tool for planning and practice with the creation of the first full-sized 3D bioprinted model of the human heart.
3D Printing Progress
Nov 17, 2020
Desirable Metals for 3D Printing Near Market Readiness

Desirable Metals for 3D Printing Near Market Readiness

Despite a temporary setback owing to the COVID-19 pandemic, the market for 3D printing of metals is expected to see a significant rise over the next decade. Within that, it is anticipated that most of the revenue will be attributed to material sales.
IDTechEx Research Subscribers
Fluoropolymer: 3D Printing, RF Sputtering, Recycling Commercialisation

Fluoropolymer: 3D Printing, RF Sputtering, Recycling Commercialisation

Processing by the fluorochemical industry is broadly as shown right. Specific fluoropolymer formulations and formats are then produced by cross linking, copolymerisation etc. then extrusion calendaring and so on.
External Company Press Release
Introducing Ultimaker 2+ Connect: Robust Single Extrusion

Introducing Ultimaker 2+ Connect: Robust Single Extrusion

The new Ultimaker 2+ Connect improves on its predecessor's legacy and allows users to send print jobs via Wi-Fi or Ethernet.
3D Printing Progress
Nov 10, 2020
Essentium Introduces Industry-First Anti-Static Material to Advance AM

Essentium Introduces Industry-First Anti-Static Material to Advance AM

Essentium introduces industry-first anti-static material to advance additive manufacturing applications in the aerospace and defense industries. TPU 58D-AS is an electrostatic discharge safe and anti-static thermoplastic polyurethane filament that is available for the first time in color.
3D Printing Progress
Nov 27, 2020
3D Printed Coral, Bioreactors Boost Microalgae Production for Biofuels

3D Printed Coral, Bioreactors Boost Microalgae Production for Biofuels

Using light as an energy source, photosynthetic microalgae can be used to produce products like biofuels and cosmetics. But algae grown in a reactor block out the light on which they feed. New reactor designs could solve this problem and help the industry move forward.
3D Printing Progress
Nov 25, 2020
Contact Lenses For Diagnostic and Therapeutic Use

Contact Lenses For Diagnostic and Therapeutic Use

Human bodily fluids and secretions contain molecules known as biomarkers that contain a wealth of information about the body's health and the presence of disease. Among secretions such as tears, sweat and saliva, tears are considered the best source of biomarkers, with concentrations similar to those found in blood.
External Company Press Release
Relativity Space Raises $500M Towards 3D Printed Rockets

Relativity Space Raises $500M Towards 3D Printed Rockets

Relativity Space, the first company to 3D print an entire rocket and build the largest metal 3D printers in the world, has closed a $500 million Series D equity funding round. The funding will enable Relativity to accelerate its planned initiatives, including its factory of the future, launch vehicle development, and 3D printing technologies.
3D Printing Progress
Nov 23, 2020
Manufacturing Breakthrough Towards Eliminating Waste in 3D Printing

Manufacturing Breakthrough Towards Eliminating Waste in 3D Printing

Materialise  announces  Bluesint PA12, a material innovation that makes it possible to 3D print with up to 100% re-used powder.
3D Printing Progress
Nov 19, 2020
3D Electronics Market Is Forecast to Reach Around $3bn by 2030

3D Electronics Market Is Forecast to Reach Around $3bn by 2030

The 3D electronics market is diversifying and is forecast to reach around $3bn by 2030. Find out more in the IDTechEx report, "3D Electronics 2020-2030: Technologies, Forecasts, Players".
External Company Press Release
Waste Concrete Repurposed into Public Furniture with 3D Printing

Waste Concrete Repurposed into Public Furniture with 3D Printing

Waste concrete from demolished buildings is to be reinvented and made into new custom-made outdoor memorials and public garden furniture thanks to a new, innovative £6m project using 3D printing.
3D Printing Progress
Nov 16, 2020
3D Printing Biomedical Parts with Supersonic Speed

3D Printing Biomedical Parts with Supersonic Speed

Forget glue, screws, heat or other traditional bonding methods. A collaboration has developed a 3D printing technique that creates cellular metallic materials by smashing together powder particles at supersonic speed.
External Company Press Release
Elementum 3D Gold Medal, US Air Force Advanced Manufacturing Olympics

Elementum 3D Gold Medal, US Air Force Advanced Manufacturing Olympics

Elementum 3D earned first place at the inaugural US. Air Force Advanced Manufacturing Olympics. The company won the event's "Material Hurdles" technical challenge with its A7050-RAM2 high-strength aluminum alloy, beating eight other finalists.
External Company Press Release
Carbon and Fast Radius Expand Strategic Partnership

Carbon and Fast Radius Expand Strategic Partnership

Carbon and Fast Radius announced an expansion of its strategic partnership that broadens Fast Radius' fleet of 3D printers with the addition of the Carbon L1 printer. The adoption of the L1 printer complements Fast Radius' in-production Carbon M series printers and expands capabilities into large part production using Carbon DLS.
More IDTechEx Journals