Hosted by IDTechEx

Sensors, Haptics & Displays

3D Printing Progress
Sep 26, 2018
Flexible thin film encapsulation and barriers: evolution of technology

Flexible thin film encapsulation and barriers: evolution of technology

It took a decade and half to enable the first commercial products using flexible barrier or thin film encapsulation technologies. Contrary to some assumptions however, this success does not mean that the question of barrier technology is forever settled. Indeed, there is still much work to do to render flexible barrier technology a ubiquitous, widely-available, and low-cost component in devices of all sizes, sensitivity levels, flexibility degrees, and so on.
IDTechEx Research Subscribers
Quantum dots vs phosphors: An analysis

Quantum dots vs phosphors: An analysis

Many consider quantum dots as the ultimate and ideal phosphor material. This is because quantum dots and phosphors both act as downconverters and therefore share many applications in lighting and displays.
3D Printing Progress
Sep 21, 2018
Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts

Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts

The new report from IDTechEx Research, Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts, provides a comprehensive analysis of the drone market, considering components, technologies, application roadmaps and markets.
3D Printing Progress
Sep 21, 2018
Smart Materials Replace Components in a Box:Billion Dollar Opportunity

Smart Materials Replace Components in a Box:Billion Dollar Opportunity

It is a technological megatrend providing billion dollar business opportunities. The unique new IDTechEx Research report "Smart Materials as Structural Electronics and Electrics 2019-2029" explains how structural materials can be electronically, electrically, mechanically, magnetically and optically smart nowadays.
3D Printing Progress
Sep 19, 2018
Quantum dots: when will color filter or on-chip QD displays arrive?

Quantum dots: when will color filter or on-chip QD displays arrive?

In this article, IDTechEx describe the emerging dynamic between the different QD approaches for displays: edge optic, film-type, color filter type, and on-chip- type. We will examine how, and when, these technologies are likely to commercially rise and fall.
3D Printing Progress
Sep 18, 2018
Multifunctionality is the future for polymer composites

Multifunctionality is the future for polymer composites

The key next iteration for fiber reinforced polymer products will be the concept of multifunctionality. This is the idea of making a structural part carry out additional role(s) beyond their current primary mechanical task - the market for smart composite material is forecast to exceed 5 kilotons by 2029.
3D Printing Progress
Sep 18, 2018
Webinar Wednesday 26 September - Progress to the Foldable OLED Display

Webinar Wednesday 26 September - Progress to the Foldable OLED Display

IDTechEx will be hosting a free webinar on Wednesday 26 September titled Progress to the Foldable OLED Display.
3D Printing Progress
Sep 12, 2018
Transparent conductive films: always a step behind the curve?

Transparent conductive films: always a step behind the curve?

ITO alternative (TCFs) are no longer a young technology. They have been in the semi commercial mode for more than a decade and half. In that time, they have often come tantalising close to success, and in some instances, even carved out niche markets. Yet, they are still hoping for that great breakthrough. So why has the commercialization process been prolonged for so long?
3D Printing Progress
Sep 12, 2018
Webinar Thursday 20 September - Smart City Opportunities

Webinar Thursday 20 September - Smart City Opportunities

IDTechEx will be hosting a free webinar on Thursday 20 September titled Smart City Opportunities.
3D Printing Progress
Sep 7, 2018
Flexible thin film encapsulation and barriers

Flexible thin film encapsulation and barriers

The need for flexible, transparent, ultrahigh performance, and low-cost barriers has long held back the promise of many flexible devices. Indeed, for long, it appeared as the grand challenge, and a potential showstopper.
3D Printing Progress
Sep 26, 2018
Flexible thin film encapsulation and barriers: evolution of technology

Flexible thin film encapsulation and barriers: evolution of technology

It took a decade and half to enable the first commercial products using flexible barrier or thin film encapsulation technologies. Contrary to some assumptions however, this success does not mean that the question of barrier technology is forever settled. Indeed, there is still much work to do to render flexible barrier technology a ubiquitous, widely-available, and low-cost component in devices of all sizes, sensitivity levels, flexibility degrees, and so on.
3D Printing Progress
Sep 21, 2018
Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts

Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts

The new report from IDTechEx Research, Drones 2018-2038: Components, Technologies, Roadmaps, Market Forecasts, provides a comprehensive analysis of the drone market, considering components, technologies, application roadmaps and markets.
3D Printing Progress
Sep 19, 2018
Quantum dots: when will color filter or on-chip QD displays arrive?

Quantum dots: when will color filter or on-chip QD displays arrive?

In this article, IDTechEx describe the emerging dynamic between the different QD approaches for displays: edge optic, film-type, color filter type, and on-chip- type. We will examine how, and when, these technologies are likely to commercially rise and fall.
3D Printing Progress
Sep 18, 2018
Webinar Wednesday 26 September - Progress to the Foldable OLED Display

Webinar Wednesday 26 September - Progress to the Foldable OLED Display

IDTechEx will be hosting a free webinar on Wednesday 26 September titled Progress to the Foldable OLED Display.
3D Printing Progress
Sep 12, 2018
Webinar Thursday 20 September - Smart City Opportunities

Webinar Thursday 20 September - Smart City Opportunities

IDTechEx will be hosting a free webinar on Thursday 20 September titled Smart City Opportunities.
IDTechEx Research Subscribers
Quantum dots vs phosphors: An analysis

Quantum dots vs phosphors: An analysis

Many consider quantum dots as the ultimate and ideal phosphor material. This is because quantum dots and phosphors both act as downconverters and therefore share many applications in lighting and displays.
3D Printing Progress
Sep 21, 2018
Smart Materials Replace Components in a Box:Billion Dollar Opportunity

Smart Materials Replace Components in a Box:Billion Dollar Opportunity

It is a technological megatrend providing billion dollar business opportunities. The unique new IDTechEx Research report "Smart Materials as Structural Electronics and Electrics 2019-2029" explains how structural materials can be electronically, electrically, mechanically, magnetically and optically smart nowadays.
3D Printing Progress
Sep 18, 2018
Multifunctionality is the future for polymer composites

Multifunctionality is the future for polymer composites

The key next iteration for fiber reinforced polymer products will be the concept of multifunctionality. This is the idea of making a structural part carry out additional role(s) beyond their current primary mechanical task - the market for smart composite material is forecast to exceed 5 kilotons by 2029.
3D Printing Progress
Sep 12, 2018
Transparent conductive films: always a step behind the curve?

Transparent conductive films: always a step behind the curve?

ITO alternative (TCFs) are no longer a young technology. They have been in the semi commercial mode for more than a decade and half. In that time, they have often come tantalising close to success, and in some instances, even carved out niche markets. Yet, they are still hoping for that great breakthrough. So why has the commercialization process been prolonged for so long?
3D Printing Progress
Sep 7, 2018
Flexible thin film encapsulation and barriers

Flexible thin film encapsulation and barriers

The need for flexible, transparent, ultrahigh performance, and low-cost barriers has long held back the promise of many flexible devices. Indeed, for long, it appeared as the grand challenge, and a potential showstopper.
More IDTechEx Journals