Hosted by IDTechEx

Sensors, Haptics & Displays

3D Printing Progress
Oct 7, 2021
Competing Short-Wavelength Infra-Red Sensing Technologies

Competing Short-Wavelength Infra-Red Sensing Technologies

The widespread adoption of machine vision makes image sensors that can detect light outside the visible spectrum increasingly useful, since the aim is to augment human sight rather than duplicate it. For example, imaging in the short-wave infra-red (SWIR) spectral region, which spans from 1000 to 2000 nm, offers multiple benefits that can supplement conventional cameras.
3D Printing Progress
Sep 29, 2021
5G Small Cells for Connected Industries

5G Small Cells for Connected Industries

A fully digitalized and connected world was unimaginable for us a couple of years ago. However, thanks to the development of 5G, this vision is in sight. 5G small cells will play an essential role in 5G networks for connected industries. This article by IDTechEx covers the benefits, challenges and opportunities.
3D Printing Progress
Sep 27, 2021
Webinar: Commercially Compelling Printed/Flexible Sensor Innovations

Webinar: Commercially Compelling Printed/Flexible Sensor Innovations

Thursday 30 September 2021 - Emerging applications for capacitive sensors, such as leak detection; Spatially resolved temperature sensors, for monitoring EV batteries and electronics, that can be combined with other functionalities; and more! Will conclude with Q&A for pre-submitted questions
3D Printing Progress
Sep 21, 2021
Integrated Electronics Trends to Drive IME Market to $1.5bn by 2032

Integrated Electronics Trends to Drive IME Market to $1.5bn by 2032

In-mold electronics enables electronic functionality to be embedded within molded and thermoformed plastic components. With the integration of capacitive touch, lighting, and even haptics alongside size and weight reductions of up to 70%, IME is an efficient approach to making curved touch-sensitive interfaces. Given these benefits, IDTechEx forecasts IME to be a $1.5 billion market by 2032, with applications mainly within the automotive and consumer goods sectors.
3D Printing Progress
Sep 17, 2021
Barriers Fall Unleashing Autonomous Cars in 2021

Barriers Fall Unleashing Autonomous Cars in 2021

The new IDTechEx report, "Autonomous Cars, Robotaxis & Sensors 2022-2042", discovers that level 3 autonomous vehicle technology has been ready since 2017- so where are the autonomous vehicles? The answer lies in unclear liability rules, which have turned out to be a massive headache for automakers like Audi, Tesla, GM, Mercedes, and others.
3D Printing Progress
Sep 14, 2021
Market for Fully Printed Sensors Will Reach 4.9 Billion by 2032

Market for Fully Printed Sensors Will Reach 4.9 Billion by 2032

Printed and flexible sensors constitute the largest printed electronics market outside of displays. Indeed, we forecast that the market for fully printed sensors will reach 4.9 billion by 2032.
3D Printing Progress
Sep 14, 2021
Join the Upcoming Webinar - Autonomous Car Market Gaining Traction

Join the Upcoming Webinar - Autonomous Car Market Gaining Traction

Wednesday 15 September 2021 - This free webinar covers: an introduction to the levels of autonomy; the mixed impact of COVID-19; autonomy in the private car market; robotaxi sensor suite and leading players; and sensors and sensor trends.
3D Printing Progress
Sep 10, 2021
Drone Technology: The Biggest Disruptive Technology of the Next Decade

Drone Technology: The Biggest Disruptive Technology of the Next Decade

Drones are the key technology of the coming two decades. They are used in many different aspects of industry, and commercial use of this technology has never been higher. IDTechEx predicts that the drone market will reach $22Bn+ by 2041, attributed in part to this wide range of use cases, in its market research report - "Drone Market and Industries 2021-2041". This article aims to provide you with an understanding and insight into this market.
3D Printing Progress
Sep 7, 2021
6G Communications Curious Progress

6G Communications Curious Progress

6G Communications promises between ten to one hundred times the download speed for operating unpowered devices, remote holographic surgery and much more, but it will depend on how high a frequency is chosen and how much infrastructure investment is made.
3D Printing Progress
Aug 31, 2021
Why Driving Will be Outlawed by 2050

Why Driving Will be Outlawed by 2050

Autonomous cars will match or exceed human safety by 2024, after which they will grow rapidly at a CAGR of 30% finds IDTechEx's new report "Autonomous Cars, Robotaxis & Sensors 2022-2042". By the 2040s, they will be capable of fulfilling the world's mobility needs without a single collision. So why should humans be allowed to continue driving?
3D Printing Progress
Oct 7, 2021
Competing Short-Wavelength Infra-Red Sensing Technologies

Competing Short-Wavelength Infra-Red Sensing Technologies

The widespread adoption of machine vision makes image sensors that can detect light outside the visible spectrum increasingly useful, since the aim is to augment human sight rather than duplicate it. For example, imaging in the short-wave infra-red (SWIR) spectral region, which spans from 1000 to 2000 nm, offers multiple benefits that can supplement conventional cameras.
3D Printing Progress
Sep 27, 2021
Webinar: Commercially Compelling Printed/Flexible Sensor Innovations

Webinar: Commercially Compelling Printed/Flexible Sensor Innovations

Thursday 30 September 2021 - Emerging applications for capacitive sensors, such as leak detection; Spatially resolved temperature sensors, for monitoring EV batteries and electronics, that can be combined with other functionalities; and more! Will conclude with Q&A for pre-submitted questions
3D Printing Progress
Sep 17, 2021
Barriers Fall Unleashing Autonomous Cars in 2021

Barriers Fall Unleashing Autonomous Cars in 2021

The new IDTechEx report, "Autonomous Cars, Robotaxis & Sensors 2022-2042", discovers that level 3 autonomous vehicle technology has been ready since 2017- so where are the autonomous vehicles? The answer lies in unclear liability rules, which have turned out to be a massive headache for automakers like Audi, Tesla, GM, Mercedes, and others.
3D Printing Progress
Sep 14, 2021
Join the Upcoming Webinar - Autonomous Car Market Gaining Traction

Join the Upcoming Webinar - Autonomous Car Market Gaining Traction

Wednesday 15 September 2021 - This free webinar covers: an introduction to the levels of autonomy; the mixed impact of COVID-19; autonomy in the private car market; robotaxi sensor suite and leading players; and sensors and sensor trends.
3D Printing Progress
Sep 7, 2021
6G Communications Curious Progress

6G Communications Curious Progress

6G Communications promises between ten to one hundred times the download speed for operating unpowered devices, remote holographic surgery and much more, but it will depend on how high a frequency is chosen and how much infrastructure investment is made.
3D Printing Progress
Sep 29, 2021
5G Small Cells for Connected Industries

5G Small Cells for Connected Industries

A fully digitalized and connected world was unimaginable for us a couple of years ago. However, thanks to the development of 5G, this vision is in sight. 5G small cells will play an essential role in 5G networks for connected industries. This article by IDTechEx covers the benefits, challenges and opportunities.
3D Printing Progress
Sep 21, 2021
Integrated Electronics Trends to Drive IME Market to $1.5bn by 2032

Integrated Electronics Trends to Drive IME Market to $1.5bn by 2032

In-mold electronics enables electronic functionality to be embedded within molded and thermoformed plastic components. With the integration of capacitive touch, lighting, and even haptics alongside size and weight reductions of up to 70%, IME is an efficient approach to making curved touch-sensitive interfaces. Given these benefits, IDTechEx forecasts IME to be a $1.5 billion market by 2032, with applications mainly within the automotive and consumer goods sectors.
3D Printing Progress
Sep 14, 2021
Market for Fully Printed Sensors Will Reach 4.9 Billion by 2032

Market for Fully Printed Sensors Will Reach 4.9 Billion by 2032

Printed and flexible sensors constitute the largest printed electronics market outside of displays. Indeed, we forecast that the market for fully printed sensors will reach 4.9 billion by 2032.
3D Printing Progress
Sep 10, 2021
Drone Technology: The Biggest Disruptive Technology of the Next Decade

Drone Technology: The Biggest Disruptive Technology of the Next Decade

Drones are the key technology of the coming two decades. They are used in many different aspects of industry, and commercial use of this technology has never been higher. IDTechEx predicts that the drone market will reach $22Bn+ by 2041, attributed in part to this wide range of use cases, in its market research report - "Drone Market and Industries 2021-2041". This article aims to provide you with an understanding and insight into this market.
3D Printing Progress
Aug 31, 2021
Why Driving Will be Outlawed by 2050

Why Driving Will be Outlawed by 2050

Autonomous cars will match or exceed human safety by 2024, after which they will grow rapidly at a CAGR of 30% finds IDTechEx's new report "Autonomous Cars, Robotaxis & Sensors 2022-2042". By the 2040s, they will be capable of fulfilling the world's mobility needs without a single collision. So why should humans be allowed to continue driving?
More IDTechEx Journals